Flexible Adhesives and Sealants

Silicones – MS polymers – Solvent-based sealants

The flexible adhesives and sealants from DREI BOND are particularly suitable for applications in which the dynamic load capacity of the adhesive connection is in the foreground. The elasticity of the connection allows deformations between the adhesive surfaces to be compensated and thus prevents ex. material fatigue and leaks.

Due to the properties mentioned, flexible adhesives and sealants from DREI BOND can be used in a variety of ways, ex. as a joint seal in the exterior and interior or as a surface sealant in engines and transmissions.

 

Silicones

Silicones are particularly characterized by their very high temperature resistance of up to 250 ° C. In addition, they have both a high elongation at break and generally very good chemical resistance.

 

MS polymers

Despite their very low hazard potential (white safety data sheet), MS polymers have both very high tensile strength and elongation at break. In addition, they have a generally good chemical resistance and are superior to other sealants, especially with regard to oil resistance.

Two-component (boosted) variants are available to enable curing regardless of the climatic ambient conditions.

 

Solvent-based sealants

The solvent-based sealants are not only characterized by their very high elongation at break, but also by their generally high chemical resistance. Due to the relatively high proportion of non-polar solvents, they have an extraordinary tolerance towards oily (non-polar) surface contamination.

Flexible Adhesives and Sealants

NameDescriptionColorViscosity [mPas]Temperature Range [°C]Skin Formation Time [min]Tensile Strength [MPa]Elongation at Break [%]Special FeaturesContainer [ml]
1209silicone, neutral (oxime)transparentstable-55 up to +20010 - 15 4.1300 30, 310Request Product Sheet
9120MS-Polymerblack / white / graypasty, can be applied with a trowel, good stability-40 up to +9020 1.9300 white MSDS290, 25000Request Product Sheet
9125MS-Polymerblack / white / graypasty, can be applied with a trowel, good stability-60 up to +8025 2.8 500white MSDS300, 25000Request Product Sheet
9125 2KMS-Polymer (10:1)black / white / graypasty, can be applied with a trowel, good stability-40 up to +9020 - 60 2.6 450490, 25000Request Product Sheet
9150MS-Polymertransparentpasty-40 up to +9010 3300 310Request Product Sheet
9160MS-Polymerblack / graypasty, can be applied with a trowel, good stability-40 up to +12010 3.2400 good oil compatibility310, 25000Request Product Sheet
9160 2KMS-Polymer (10:1)black / graypasty, can be applied with a trowel, good stability-40 up to +12010 - 28 2.8 350excellent oil resistance490, 25000Request Product Sheet

Note on curing: On average 3mm on the 1st day, longer thereafter. Depending on the substrate, temperature, humidity, gap

*Container (PU): 30ml (50), 50ml (10), 300ml (12)

NameDescriptionColorViscosity [mPas]Temperature Range [°C]Skin Formation Time [min]Tensile Strength [MPa]Elongation at Break [%]Special FeaturesContainer [g]
1104Tsolvent-based sealantgray40000 - 80000-50 up to +13082 - 4450 - 650thixotropic300, 20000Request Product Sheet
1108permanently ductile sealantblue > 1000000-55 up to +120non-curing--white MSDS50, 100, 300, 25000Request Product Sheet

Note on curing: On average 3mm on the 1st day, longer thereafter. Depending on the substrate, temperature, humidity, gap